Smart Ray Ecco X 025

$0.00

SKU: 3.002.131 Category: Tags: ,

3.002.131

FAST AND FLEXIBLE 3D SCANNING WITH 
EXTRAORDINARY SPEEDS UP TO 40 KHZ

The new ECCO X model delivers exceptional speed and resolution in an extraordinary compact design. Providing 3D laser scanning for customers where previously 3D laser triangualtion was not a viable solution due to speed or resolution issues. Ultra-high definition paired with high speed for best performance under challenging conditions.

Available on backorder

Description

Properties & Benefits

  • EXTRAORDINARY SPEED
    up to 40 kHz scan rat
  • EXCEPTIONAL RESOLUTION
    4096 3D points
  • MAXIMUM FLEXIBILITY
    4 connector options
  • COMPACT DESIGN
    smallest in its class

Product Specification

 

Part #3.002.131
Typical field of view (near | mid | far) 122 | 25 | 29 mm
Typical measurement range 120 mm
Stand-off distance66 mm
Typical vertical resolution (Z) 10.9 – 1.4 μm
Typical lateral resolution (Y) 15 – 7 μm
Z-linearity 2, 50.005 %
Z-repeatability 4, 50.2 µm
WeightApprox. 750g
Maximum points / 3D profile4096
Typical scan rate 1Up to 40 kHz
Typical 3D point rate 1Up to 163 million points/sec
InterfaceGigabit Ethernet ( 1 Gbit/ sec)
Inputs2x Inputs (5 – 24 VDC)
Quadrature Encoder (AB-Channel, RS-422 standard)
Outputs2 x Outputs, 24 VDC (max. 20 mA)
TriggerSTART Trigger support on Input 1
DATA Trigger support on Quadrature Encoder Input (Max. DATA trigger rate: 1 MHz)
DATA Trigger support on Input 2 (Max. DATA trigger rate: 5 kHz)
Input voltage | Power24 VDC ± 15% | 10 W
Laser wavelength450nm
Laser class2
Maximum ambient light10,000 lx
EMC testas per EN 61 000-6-2, EN 61 000-6-4, EN 61326-1:2013-07
Laser safety inputs24 VDC +/- 15%
Electrical safetyas per EN 61 010-1
Protection classas per EN 61 010-3
Enclosure ratingIP67
Air humidityMaximum 90%, non-condensing
Temperature (operation | storage)0 – 40° C | -20 – 70° C
Compatible accessoriesPower-I/O-Encoder cable: 6.320.0XX
Ethernet cable: 6.303.0XX in 5 m or 10 m

Note: Typical values may vary up to ±5% due to optical and production tolerances

1 Scan rate & point rate are dependent on the configured field of view, measurement range and exposure time. A ‚scan‘ by definition considers maximum points/3D profile i.e. full FOV.
The typical scan/point rate range has been estimated considering an exposure time of 1 μsec, min-max MR and full FOV. The typical scan rate can be further boosted by windowing the FOV.

Datasheet

SmartRay ECCO X 25 Datasheet

Additional information

Brand

Brand Series

Technology