Description
Camera, kit, go – connect and start!
The Basler CXP-12 boost Starter Kit lets you instantly setup and evaluate your Basler boost camera bundle. The set contains everything you need: You connect the camera to the Basler CXP-12 interface card 1C with the CoaXPress data cable. The two included heat sinks ensure that the camera stays sufficiently cool in your test scenario. The C-mount lens adapter can be used to attach your C-mount lens and the I/O cable helps trigger your camera.
General Information
| Design-In Sample | Q3/2019 |
| Series Production | Q4/2019 |
| Accessory Type | Vision Component Kit |
| Components Included | Cables: Cable CXP, Micro-BNC x2 (HD-BNC), 3m & Power-I/O Cable M8 6p/open, 5m Additional Accessories: Heat sink for Basler boost cameras & C-mount for boost, racer |
Cable CXP, Micro-BNC x2 (HD-BNC), 3m
| Design-In Sample | Q3/2019 |
| Series Production | Q4/2019 |
| Accessory Type | Data Cables |
| Cable Length | 3 m |
| Connector Camera Side | Micro-BNC (HD-BNC) |
| Connector Host Side | Micro-BNC (HD-BNC) |
| Moving Characteristic | Static |
| Interface | CoaXPress |
Power-I/O Cable M8 6p/open, 5m
| Design-In Sample | Q3/2019 |
| Series Production | Q4/2019 |
| Accessory Type | Data Cables |
| Cable Length | 5 m |
| Connector Camera Side | M8 6-pin |
| Connector Host Side | None (open end) |
| Moving Characteristic | Static |
| Interface | I/O |
C-mount for boost, racer
| Accessory Type | Lens Accessories |
| Accessory Developer | Basler |
| Lens Accessories Type | Lens mount |
| Suitable Lens Mount | C-mount |
Heat Sink for Basler boost Cameras
| Design-In Sample | Q3/2019 |
| Series Production | Q4/2019 |
| Accessory Type | Housing Accessories |
| Housing Size (L x W x H) | 75 mm x 41.5 mm x 34 mm |
| Thermal Resistance | 2.8 K/W |
| Design-In Sample | Q3/2019 |
| Series Production | Q4/2019 |
| Accessory Type | Housing Accessories |
| Housing Size (L x W x H) | 75 mm x 41.5 mm x 34 mm |
| Thermal Resistance | 2.8 K/W |
