Description
| Dimensions | 109x86x30mm | |||||||
| Channels | 3 outputs | |||||||
| Max. Current per channel | 6A | |||||||
| Max. Current | 18A (joining all outputs into one channel)./td> | |||||||
| Power supply | +24VDC ±3%. | |||||||
| Power adjust | 255 levels of control at each independent exit from 0mA to the maximum level set. | |||||||
| Scalable | Up to 24 outputs and a total of 8 devices can be controlled through one VCP100 configuration cable, by interconnecting the strobe controllers using the interface port and the VCL cable.
| |||||||
| Port Control | USB programming cable VCP100* (Non included). RS232, RS485 or Ethernet adapter (Consult). | |||||||
| Pulse width range | Configurable between 24µS…2mS in steps of 1µS. | |||||||
| Pulse delay | Between 30µS and 13.1mS in steps of 1µS. | |||||||
| Max. trigger frequency | 1000 Pulses/S at full power. | |||||||
| Trigger edge | Selectable. | |||||||
| Memory | 16 memory banks to hold preset output currents. | |||||||
| Trigger input | Opto isolated. | |||||||
| Trigger output | For camera. Auto-trigger (enables live imaging). | |||||||
| Thermal protection | √ | |||||||
| Fixing points | Two M4 screw grooves for panel anchoraging. | |||||||
| Updatable Firmware | √ | |||||||
