Gardasoft PP600F

PP600 LED Strobe Controller

Key features:

  • Compatible with nearly any LED lighting assembly available today
  • Two independently controlled output channels
  • Push button interface with optional RS232 connectivity
  • Small compact unit with optional DIN mounting available

PP600 Quick Specification:

  • 2 channel output
  • Optical RS232 interface
  • 10A maximum pulsed
  • 4A maximum continuous
  • Supply voltage 12-48V DC
  • SafeSense™ enabled
  • 20µS minimum pulse width
  • Optional 5µS pulse width (F version)

Available on backorder


To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP600 LED lighting controller offers two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The ‘F’ version controller will allow pulse width control down to 5µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The PP600 also has an additional mode of operation called switched mode. This enables you to very quickly change your light from one intensity setting to another simply by changing the states of the two trigger inputs (high or low). The end result is you can preset up to four different light intensity values and quickly switch from one setting to the next just by changing the states of the trigger inputs.

Product Specification

User interfacePushbutton
Lighting connectionScrew Terminal
Output channels Two independent constant current outputs
Output currentFrom 0 to 10A in steps of 0.25mA up to 750mA / Steps of 2.5mA for higher currents
Maximum current per channel: 10A pulsed or 4A continuous
Trigger inputsTwo opto-isolated digital inputs. Requires 5 – 24v
Pulse width timingFrom 5uS to 10mS in steps of 1uS Timing repeatability 1uS
Delay from trigger to pulse From 10uS to 10mS in steps of 2uS Timing repeatability 2uS
Output voltage0V to 39V
Supply voltageRegulated 12 – 48v. The supply voltage must be at least 1v higher than the output voltage required by the light
Dimensions118mm long, 76mm wide, 27mm high
(excluding DIN fixing)
MountingDIN rail or panel mounting.


Gardasoft PP600 Series Datasheet

Additional information


Brand Series