Gardasoft RC100

The RC Series LED Lighting Controllers

Key features:

  • Entry level controllers
  • Single channel LED control
  • Push button and Ethernet configuration options
  • SafeSense™ technology for safe overdriving
  • SafePower™ for easy installation
  • Compatible with nearly any LED lighting assembly available today

Available on backorder


The RC range is Gardasoft’s latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the needs of perhaps having to use a bespoke DC power supply or heat sinking the controller. All RC models also include our SafeSense™ technology. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft RC Series controllers are therefore single channel current source devices.

The RC Series models can be quickly configured using our free software (which can be downloaded via the software link on this page), or for the Ethernet enabled RC120 controller, simply by accessing the controller via your internet browser; type the IP address for the controller into your browser and you have full access to all of the parameters. Using a third party software package? Not a problem, the RC range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected.

Product Specification

User interfacePush-button
Output channels One constant current output with SafeSense™
Output currentUp to 1.0A continuous or 1.0A pulsed
Output PowerMax 25W
Trigger inputsSmart input compatible with 3V-24V, TTL, NPN, and PNP
Input impedance (nominal): 50kohm
TimingFrom 100µs to 100ms in steps of 100µs
Delay from trigger to pulseFrom 2µs to 100ms in steps of 100µs
Timing repeatability  (Delay)±5µs (Delay + Pulse up to 60ms)
Otherwise ±50µs
Timing repeatability (Pulse width)±0.1µs (Delay + Pulse up to 1ms)
±5µs (Delay + Pulse from >1ms to 60ms)
Otherwise ±50µs
Switch mode latencyMaximum 100µs
Trigger rateMaximum 100Hz
Output voltage0V to 32V
Supply voltageRegulated 24V ±10%
A SELV power supply is required
Dimensions101mm long by 35mm wide by 120mm high (excluding DIN fixing)
MountingDIN rail mount as standard
Operating temperature5 to 50°C
HumidityUp to 95% non-condensing


Gardasoft RC Series Datasheet

Additional information


Brand Series