The RT range is Gardasoft’s latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources, with the RT200 controller range offering two output channels which are independently controlled.
Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The ‘F’ version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger.
|Output channels||Two independent constant current outputs with SafeSense™|
|Output current||From 0mA to 20A in steps of 5mA.|
Up to 3A per channel continuous or 20A pulsed
|Output Power||Max 30 W per channel|
|Trigger inputs||2 opto-isolated digital inputs.|
Require 3v to 24v operation
|Timing||From 1µS to 999 ms in steps of 1µs/100µs|
|Delay from trigger to pulse||From 3µS to 999 ms in steps of 1µs/100µs|
|Timing repeatability||Delay + Pulse up to 10ms:|
0.1µS for pulse width and 2µS for delay.
|Output voltage||0V to 46V|
|Supply voltage||Regulated 24V to 48V|
|Dimensions||112mm long by 97mm wide by 62mm high|
(excluding DIN fixing)
|Mounting||Panel mounting. DIN rail mount option|