Metaphase ULC-2

Provides independent, constant-current control of two LED loads at up to 4amps continuous DC and a maximum output power of 60 Watts per channel. In Pulse (Strobe) Mode, the ULC-2 is capable of output currents up to 40 amps. The ULC-2 is capable of driving LED forward voltages between 3V and 20V and higher, but with a possible reduction in maximum pulse current. Pulsewidths are adjustable down to 2 microseconds and external trigger rates up to 50kHz.

Available on backorder



This unit is a comprehensive control device built for compatibility with standard LED illumination systems. For continuous, intensity, and strobing control with programmability for preset parameters, trigger delay, and pulse variation via user-friendly LCD or using Ethernet and usB commands.


  • Strobe or continuous operation
  • 2 channel output
  • Din rail mountable
  • Compact design
  • LCD display
  • Ethernet and USB Connectivity
Number of Channels2
Voltage Input24V+/-10%
Voltage Output3V to 65V
DC Current20mA min to 4A max
Pulse Current100mA min to 40A max
Pulsewidth Minimum2 microseconds
Pulsewidth Maximum60,000 microseconds
Power Output60 Watts/channel
Trigger InputOpto-isolated, 3V-24V, 7mA draw, rising or falling edge triggered
Trigger RateUp to 50khz
Ethernet ControlUDP messaging over 172.16 sub-net – UDP Port 5000
Operating ModeDC, Pulse (Strobe), Constant Voltage
Expected Lifetime75,000 hours
Dimensions7.40″ x 4.72″ x 2.27″

Additional information


Brand Series