SmartRay Dual-Head ECCO 95.040+ (Laser Class 3R)

SKU: 3.004.603 Category: Tags: ,


The Dual-Head ECCO 95+ models deliver competitive two camera 3D sensors for applications where shadow free 3D scanning is essential. Providing 3D laser scanning for customers where previously 3D laser scanning was not a viable solution due to occlusions. Ultra-high resolution paired with superior image quality for best performance under challenging conditions.

Available on backorder


Properties & Benefits

    two camera 3D scanning for optimum target visibility
    the capability to inspect extremely fine features
    the best repeatability under challenging conditions

Product Specification

Part #3.004.603 (laser class 2)
Typical field of view
(near | mid | far) 1
34| 36| 38 mm
Typical measurement range 116 mm
Stand-off distance55 mm
Typical vertical resolution (Z) 11.4-1.8 μm
Typical lateral resolution (Y) 118-20 μm
Z-linearity 2, 50.006 %
Z-repeatability 4, 50.4 µm
WeightApprox. 1350g
Maximum points / 3D profile3840
Typical scan rate 3Approx. from 1 kHz up to 10 kHz
Typical 3D point rate 3Approx. from 0.7 up to 15 million points/sec
InterfaceGigabit Ethernet ( 1 Gbit/ sec)
Inputs2x Inputs (5 – 24 VDC)
Quadrature Encoder (AB-Channel, RS-422 standard)
Outputs2 x Outputs, 24 VDC (max. 20 mA)
TriggerSTART Trigger support on Input 1 – 2
DATA Trigger support on Quadrature Encoder Input (Max. DATA trigger rate: 1 MHz)
DATA Trigger support on Input 2 (Max. DATA trigger rate: 10 kHz)
Input voltage | Power24 VDC ± 15% 17W
Laser wavelength450nm
Laser class (standard | optional)2M | 3R
Maximum ambient light10,000 lx
EMC testas per EN 61 000-6-2, EN 61 000-6-4, EN 61326-1:2013-07
Laser safety inputs24 VDC | 0V
Electrical safetyas per EN 61 010-1-3
Protection classIII, as per EN 61 040-3
Enclosure ratingIP65
Air humidityMaximum 90%, non-condensing
Temperature (operation | storage)0 – 40° C | -20 – 70° C
Compatible accessoriesPower-I/O-Encoder cable: 6.320.0XX
Ethernet cable: 6.303.0XX
Y-Encoder Cable: 6.445.003

(1) Typical values can vary up to 5% due to optical tolerances
(2) Z-Linearity calculated as a variation of “bias” (reference value vs. measured value) over the measurement range. The %slope of a best-fit (regression) line from a plot of bias over measurement range represents Z-Linearity
(3) Scan rate & point rate are dependent on the configured field of view, measurement range and exposure time. The typical scan/point rate has been estimated with an exposure time of 1 µsec
(4) Experimentally asessed by scanning a measurement target moving over a conveyor belt 50 times. Measurement perfomed by averaging height values within the Z-Map image. No post-processing filters applied
(5) Measurements performed on a SmartRay standard artifact which is an aluminium flat matt surface painted matte white


SmartRay Dual-Head ECCO 95.040+ Datasheet

Additional information


Brand Series