SmartRay ECCO 95.025G (Laser Class 3R)

SKU: 3.004.193 Category: Tags: ,


Delivering superior 3D data quality in a compact design, the ECCO 95.025G has been developed to scan flat glass and specular, highly reflective surfaces. Combining our reliable ECCO 95 sensor technology with an optimised lens and optics, it provides a high-accuracy, high-resolution, high-speed scanning solution.

Available on backorder



  • Designed specifically to measure glass and specular surfaces
  • High-speed 3D scanning
  • Superior 3D image quality
  • Ultra-high-resolution imaging
  • Economic and compact

Product Specification

Part #3.004.193 (class 3R)
Typical field of view
(near | mid | far) 1
25 mm | 28,5 mm | 25 mm
Measurement range 115 mm
Typical vertical resolution (Z) 11.4 – 1.9 µm
Typical lateral resolution (Y) 113.0 µm – 14.5 µm
Stand-off distance64 mm
Mounting distance89 mm
Laser wavelength450 nm (brilliant blue laser)
Laser class (standard)3R
Maximum points / 3D profile1920
MountingSensor mounted at 14.5° pitch angle (sensor is shipped with mounting adapter)
WeightApprox. 825 g (includes mounting adapter)
Typical scan rate 3Approx. from 1 kHz up to 10 kHz (with full FOV)
Typical 3D point rate 3Approx. from 0.7 up to 15 million points/sec
InterfaceGigabit Ethernet ( 1 Gbit/ sec)
Inputs2 x Inputs, 5 – 24 VDC
Quadrature Encoder (AB-Channel, RS-422 Standard)
Outputs2 x Outputs, 24 VDC (max. 20 mA)
TriggerSTART Trigger support on Input 1 – 2
DATA Trigger support on Quadrature Encoder Input (Max. DATA trigger rate: 100 MHz)
DATA Trigger support on Input 2
Input voltage | Power24 VDC | 7.5 W
Maximum ambient light10,000 lx
EMC testas per EN 61 000-6-2, EN 61 000-6-4
Vibration/ Shock testas per EN 60 086-2-6, -27, -29, -64
Electrical safetyas per EN 61 010-1-3
Protection classIII, as per EN 61 040-3
Enclosure ratingIP65
Air humidityMaximum 90%, non-condensing
Temperature (operation | storage)0 – 40° C | -20 – 70° C
Compatible accessoriesPower-I/O-Encoder cable: 6.320.0XX
Ethernet cable: 6.303.0XX

(1) Typical values can vary up to 5% due to optical tolerances
(2) Z-Linearity calculated as a variation of “bias” (reference value vs. measured value) over the measurement range
(3) Scan rate & point rate are dependent on the configured field of view, measurement range and exposure time. A ‘scan’ by definition considers maximum points/3D profile i.e. full FOV. The typical scan/point rate range has
been estimated considering an exposure time of 1 µsec, min-max MR and full FOV. The typical scan rate can be further boosted by windowing the FOV
(4) Experimentally assessed by scanning a fixed measurement target 4100 times successively within short time interval. No post-processing filters applied
(5) Measurements performed on a SmartRay standard artifact which is an aluminium flat matt surface painted matte white


SmartRay ECCO 95.025G Datasheet

Additional information


Brand Series